MENU
Home > High temperature bearings > high temperature 93-97 Dodge/Eagle Intrepid Vision 215 3.5L SOHC V6 Main & Rod Bearings
high temperature 93-97 Dodge/Eagle Intrepid Vision  215 3.5L SOHC V6  Main & Rod Bearings

high temperature 93-97 Dodge/Eagle Intrepid Vision 215 3.5L SOHC V6 Main & Rod Bearings

high temperature 93-97 Dodge/Eagle Intrepid Vision 215 3.5L SOHC V6 Main & Rod Bearings are designed to deliver increased reliability, reduced complexity and decreased environmental impact in operating temperatures up to 350 °C (660 °F). Because SKF high temperature bearings correspond to the ISO dimensions of grease-lubricated bearings, production efficiencies and cost savings can be realized with a simple change to the SKF bearing solution. high temperature 93-97 Dodge/Eagle Intrepid Vision 215 3.5L SOHC V6 Main & Rod Bearings offers a wide range of high temperature bearings and units according to ISO standards and also a range of customized high…
Contact Us Now !

Product description

high temperature 93-97 Dodge/Eagle Intrepid Vision 215 3.5L SOHC V6 Main & Rod Bearings are designed to deliver increased reliability, reduced complexity and decreased environmental impact in operating temperatures up to 350 °C (660 °F). Because SKF high temperature bearings correspond to the ISO dimensions of grease-lubricated bearings, production efficiencies and cost savings can be realized with a simple change to the SKF bearing solution. high temperature 93-97 Dodge/Eagle Intrepid Vision 215 3.5L SOHC V6 Main & Rod Bearings offers a wide range of high temperature bearings and units according to ISO standards and also a range of customized high temperature bearings. Selection of an appropriate high temperature bearing is based on the bearing type and the operating conditions (primarily the temperature and speed) of the machinery.

Except for  high temperature 93-97 Dodge/Eagle Intrepid Vision 215 3.5L SOHC V6 Main & Rod Bearings, SKF Y-bearings (insert bearings) for high temperatures correspond in design to standard Y-bearings with grub screws in the YAR 2-2F series. The bearings have a shield and a flinger on both sides to prevent the ingress of solid contaminants into the bearing. The radial internal clearance is a multiple of C5 to prevent the bearings from seizing, even when they cool rapidly.
The entire surface of the bearing and the shields and flingers are manganese phosphated to enhance adhesion of the lubricant to the metal, thus improving the running-in properties of the bearing.
The SKF core assortment of high temperature bearings and bearing units corresponding to ISO standards includes:
6201-2Z/VA201 6201-2Z/VA228 6202-2Z/VA228 6202-2Z/VA201 6203-2Z/VA228 6303-2Z/VA228 6003-2Z/VA208 6003-2Z/VA201 6203-2Z/VA201 6004-2Z/VA208 6004-2Z/VA201 6204-2Z/VA228 6304-2Z/VA228 6304-2Z/VA208 6204-2Z/VA201 6304-2Z/VA201 6305-2Z/VA208 6005-2Z/VA208 6005-2Z/VA201 6305-2Z/VA201 6205-2Z/VA228 6305-2Z/VA228 6205-2Z/VA201 6205-2Z/VA208 6206-2Z/VA208 6306-2Z/VA228 6006-2Z/VA208 6206-2Z/VA201 6206-2Z/VA228 6306-2Z/VA208
6207-2Z/VA228 6207-2Z/VA208 6207-2Z/VA201 6307-2Z/VA208 6308-2Z/VA201 6308-2Z/VA208 6208-2Z/VA228 6308-2Z/VA228 6208-2Z/VA208 6008-2Z/VA208 6208-2Z/VA201 6209-2Z/VA201 6209-2Z/VA208 6209-2Z/VA228 6309-2Z/VA208 6010-2Z/VA208 6210-2Z/VA201 6210-2Z/VA208  6310-2Z/VA228 6310-2Z/VA208
 high temperature 93-97 Dodge/Eagle Intrepid Vision 215 3.5L SOHC V6 Main & Rod Bearings operating temperature up to 350 °C (660 °F) – the internal radial clearance and the lubricant are optimized for operation at high temperatures
simple mounting and dismounting – the grub (set) screws in the inner ring make mounting/dismounting easy
protection against contamination – shields and flingers (designation suffix 2F) protect the bearing 
 high temperature 93-97 Dodge/Eagle Intrepid Vision 215 3.5L SOHC V6 Main & Rod Bearings provide:
excellent performance in hot conditions, dry environments and low rotational speed applications
Typical areas where  high temperature 93-97 Dodge/Eagle Intrepid Vision 215 3.5L SOHC V6 Main & Rod Bearings are used include:
 metals industry (cooling beds for steel plate)  food and beverage industry (continuous baking ovens, wafer baking ovens) paint lines


TOP QUALITY PARTS —  AMAZING PRICE — FAST SHIPPING —  PERFORMANCE — TOP QUALITY — CALL US!!!

 


APPLICATION:

1993-1997 Dodge Chrysler 215 3.5L SOHC V6
Iron Block Engines Only
*1993-1997 Dodge Intrepid
*1993-1997 Chrysler New Yorker
*1993-1997 Chrysler LHS
*1993-1997 Eagle Vision
*1997 Plymouth Prowler
 
 
 
THIS LISTING WILL INCLUDE:
(.25mm=.010″, .50mm=.020″)
 



  • MAIN BEARINGS (SET)

Sizes Available:  STD,  .010,  .020


 




  • ROD BEARINGS (SET)

Sizes Available:  STD,  .010,  .020


 


NOTE:If you want the oversized parts, PLEASE send us a direct message over eBay stating the sizes of parts you are requesting.  You may also leave us a note in the Add Instructions to Seller box that PayPal provided when you go to check out with PayPal (remember to click save).   



 
 
MORE INFORMATION: 

These bearings are manufactured by KING BEARINGS. King is one of the top manufacturers for the US Space Program, and they use the same quality assurence on their engine bearings. King Bearings are not only of outstanding quality, but they are very unique in design. Here is where quality, design, and value all come together. These are simply the best bearings on the market. The benefits of using these bearings are:


Tri-Metal vs. Bi-Metal Bearings



Traditional rod and main bearing construction is based upon a three layer configuration composed of a steel backing, a copper-lead layer and a very thin overlay of babbitt material only .0005″ – .0008″ thick.


These bearing uses just two layers, a high strength steel backing plus a bonded layer of “Alecular” bearing material .012″ – .015″ thick.


Alecular material is an alloy of aluminum, tin, copper and several other elements. Because it is an alloy, it maintains its properties throughout its entire depth, delivering consistent and reliable performance.


Particle Embedability



More than half of engine bearing failures are caused by metallic particles which scratch crank journals and tear or weaken thin babbitt overlays such as in the tri-metal bearing.


Since Alecular bearing layer is much thicker than the babbitt overlay (.015″ vs. .0008″), it provides eighteen (18) times more embedability than a tri-metal bearing to catch and hold particles so they don’t scratch the crank journals. This is especially true for particles over .0004″ in diameter which cause most of the damage.


Conformability



The much thicker layer of Alecular bearing material (.015″ vs. .0008″) allows the bearing to conform to problems such as metal to metal contact when there is mis-alignment present or the connecting rods stretch. Greater conformability means fewer bearing failures.


Temperature Resistance


The Alecular material’s melting/fatigue point is over 11000 F, almost three times that of the thin babbitt overlay in a tri-metal bearing (400OF). This means added protection against localized overheating due to mis-alignment, detonation, overloading, loss of coolant, etc.


You simply CAN’T buy a better quality Bearing Set for any production application, AT ANY PRICE…


 
If you have ANY questions, feel free to give us a call:
Redline Engine Supply
Office: (503)719.7715

Monday-Friday: 9:00am-5:00pm PST
 

 








Click on Small icon to see more pictures
 

 


 

 

 


 


Our goal is to earn 5-STAR RATING and POSITIVE FEEDBACK with EVERY Purchase!
Here at REDLINE, we are committed to your satisfaction.  With every valued customer we will automatically leave you positive feedback within 48 hours after we have recieved cleared payment from you.  We want you to be 100% happy with your order. When you receive your order please take some time and leave us postive feedback with Ebay.  If you are not satisfied, or do not believe you can leave us positive feedback, PLEASE let us know before leaving feedback.  Send us a message on Ebay or give us a call at (503)314-5830 and we will do WHATEVER it takes to earn your satisfaction. 
Please know that a 5-Star Rating and Postive Feedback is very, very appreciated, and VITAL to us continuing to provide quality auto parts at a low cost to the customer.  Thanks!
 GUARANTEES
Any warranties on the products(s) sold hereby are those made by the manufacturer. The seller, REDLINE Engine Supply, hereby expressly disclaims all warranties, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose, and REDLINE Engine Supply neither assumes nor authorizes any other person to assume for it any liability in connection with the sale of said products. Any limitation contained herein does not apply where prohibited by law. New items can be returned in unopened, unused condition for refund (subject to 20% restocking fee) or replacement within 7 days. We cannot refund S&H on standard returns.  If there was a mistake in the order made by REDLINE, we will happily replace or refund the products with NO restocking fee, no questions asked. Here at REDLINE, we STAND by our products and service. 

WE ACCEPT: 



  • PAYPAL

  • Visa

  • MasterCard

  • Discover Card

  • American Express



  • To pay with a CREDIT CARD call our office at (503)719.7715

  •  Payment must be received within 3 business days of the purchase. 

 Once payment for an order is received the product will generally be shipped the SAME DAY.  Except on weekends and federal holidays, then the items will be shipped the next available shipping day.  Actual shipping time usually takes between 2-7 shipping days, depending on location.  If you do not recieve your items in 7 shipping days please contact us and we will locate your order. We use UPS/FEDEX for all of our Continental USA shipments.  We will need your shipping address and billing address before any shipment is made. Shipments MUST be inspected at the time of the delivery for damage. If a freight claim is not filed then we can not do anything. Contact us to do a freight claim immediately if damage is noticed. 
 
*Shipping Charge covers the 48 Continental United States ONLY.
 
*Shipping to Hawaii/Alaska is available, but an additional shipping surcharge will be applied.
 
*To ship to Canada you must use a valid credit card, and the buyer must agree to pay for 100% of the aquired shipping costs. 

REDLINE Engine Supply is more than just your normal eBay store.  We are a one-stop service for all your engine rebuild parts and needs. We will work with you to make sure you are getting the exact parts you need. We pride ourselves on being able to supply high-quality engine parts at great low, low prices! 
With REDLINE on your side there is no reason to ever have to overspend at the Napa, CarQuests, and O’Reillys of the world.  With REDLINE there is no reason to ever have to deal with the outragious markups of your local machine shops. With REDLINE you get the parts you need, at the price you deserve, delivered to your door!!
If you have any questions before ordering please give us a call/email with your VIN# to make sure this is the correct component for your vehicle application.


 


Redline Engine Supply



Portland, Oregon


Office: (503)719.7715
 



 


Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.


Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.

Please Contact Us !

Click