MENU
Home > High temperature bearing units > high temperature LRX25+220mm Used IKO Roller Linear Bearing THK SRG25C NSK RA25EM 2Rail 2Block
high temperature LRX25+220mm Used IKO Roller Linear Bearing THK SRG25C NSK RA25EM 2Rail 2Block

high temperature LRX25+220mm Used IKO Roller Linear Bearing THK SRG25C NSK RA25EM 2Rail 2Block

high temperature LRX25+220mm Used IKO Roller Linear Bearing THK SRG25C NSK RA25EM 2Rail 2Block are designed to deliver increased reliability, reduced complexity and decreased environmental impact in operating temperatures up to 350 °C (660 °F). Because SKF high temperature bearings correspond to the ISO dimensions of grease-lubricated bearings, production efficiencies and cost savings can be realized with a simple change to the SKF bearing solution. high temperature LRX25+220mm Used IKO Roller Linear Bearing THK SRG25C NSK RA25EM 2Rail 2Block offers a wide range of high temperature bearings and units according to ISO standards and also a range of customized high…
Contact Us Now !

Product description

high temperature LRX25+220mm Used IKO Roller Linear Bearing THK SRG25C NSK RA25EM 2Rail 2Block are designed to deliver increased reliability, reduced complexity and decreased environmental impact in operating temperatures up to 350 °C (660 °F). Because SKF high temperature bearings correspond to the ISO dimensions of grease-lubricated bearings, production efficiencies and cost savings can be realized with a simple change to the SKF bearing solution. high temperature LRX25+220mm Used IKO Roller Linear Bearing THK SRG25C NSK RA25EM 2Rail 2Block offers a wide range of high temperature bearings and units according to ISO standards and also a range of customized high temperature bearings. Selection of an appropriate high temperature bearing is based on the bearing type and the operating conditions (primarily the temperature and speed) of the machinery.

Except for  high temperature LRX25+220mm Used IKO Roller Linear Bearing THK SRG25C NSK RA25EM 2Rail 2Block, SKF Y-bearings (insert bearings) for high temperatures correspond in design to standard Y-bearings with grub screws in the YAR 2-2F series. The bearings have a shield and a flinger on both sides to prevent the ingress of solid contaminants into the bearing. The radial internal clearance is a multiple of C5 to prevent the bearings from seizing, even when they cool rapidly.
The entire surface of the bearing and the shields and flingers are manganese phosphated to enhance adhesion of the lubricant to the metal, thus improving the running-in properties of the bearing.
The SKF core assortment of high temperature bearings and bearing units corresponding to ISO standards includes:
6201-2Z/VA201 6201-2Z/VA228 6202-2Z/VA228 6202-2Z/VA201 6203-2Z/VA228 6303-2Z/VA228 6003-2Z/VA208 6003-2Z/VA201 6203-2Z/VA201 6004-2Z/VA208 6004-2Z/VA201 6204-2Z/VA228 6304-2Z/VA228 6304-2Z/VA208 6204-2Z/VA201 6304-2Z/VA201 6305-2Z/VA208 6005-2Z/VA208 6005-2Z/VA201 6305-2Z/VA201 6205-2Z/VA228 6305-2Z/VA228 6205-2Z/VA201 6205-2Z/VA208 6206-2Z/VA208 6306-2Z/VA228 6006-2Z/VA208 6206-2Z/VA201 6206-2Z/VA228 6306-2Z/VA208
6207-2Z/VA228 6207-2Z/VA208 6207-2Z/VA201 6307-2Z/VA208 6308-2Z/VA201 6308-2Z/VA208 6208-2Z/VA228 6308-2Z/VA228 6208-2Z/VA208 6008-2Z/VA208 6208-2Z/VA201 6209-2Z/VA201 6209-2Z/VA208 6209-2Z/VA228 6309-2Z/VA208 6010-2Z/VA208 6210-2Z/VA201 6210-2Z/VA208  6310-2Z/VA228 6310-2Z/VA208
 high temperature LRX25+220mm Used IKO Roller Linear Bearing THK SRG25C NSK RA25EM 2Rail 2Block operating temperature up to 350 °C (660 °F) – the internal radial clearance and the lubricant are optimized for operation at high temperatures
simple mounting and dismounting – the grub (set) screws in the inner ring make mounting/dismounting easy
protection against contamination – shields and flingers (designation suffix 2F) protect the bearing 
 high temperature LRX25+220mm Used IKO Roller Linear Bearing THK SRG25C NSK RA25EM 2Rail 2Block provide:
excellent performance in hot conditions, dry environments and low rotational speed applications
Typical areas where  high temperature LRX25+220mm Used IKO Roller Linear Bearing THK SRG25C NSK RA25EM 2Rail 2Block are used include:
 metals industry (cooling beds for steel plate)  food and beverage industry (continuous baking ovens, wafer baking ovens) paint lines

Specification

Model Number : LRX25

Manufacturer: IKO

Country Of Origin :
Japan

Quantity: 1SET
(2Rails, 2Blocks)

LM Guide Type : Roller
Type

Main Size (Metric mm) :

  • Height (Rail Combination with Block) = 36mm
  • Width (Block width) = 70mm
  • Width (Rail
    width) = 23mm

  • Block
    upper surface fastening dimension = 57mm X 45mm (You can use M8 Bolt)

  • Rail hole pitch : 60mm
  • Rail hole size : 7mm X
    11mm X 9mm (You can use M6 Bolt)

Length of track rail :
220mm

G value (A distance of the rail that end of the rail
to the first hole) : 
G:20mm , 20mm
Pitch of rail  : 20 + ( 60 X 3 ) + 20

 

Features of Item

  • High rigidity against
    any directional load.

  • Excellent load balance
    and moment load capacity.
  • In general roller type linear
    bearing’s motion is tight and little jam.

  • The roller type linear
    bearing’s motion is not smooth.

 

Length of track rail, there can be a difference of 1~2mm

The roller inside
the block, can fall if you eject the block from rail

If you eject the block from rail, you should handling the block very
carefully.

This Product rail was processed “RAYDENT” for anti
rust

“RAYDENTed” product are usually black or dark gray
color.

There is some scratch and used marks
at the rail. But the scratch is not related with the block’s backlash.

We check the item carefully prior to ship, so buy the item with confidence.

 

The Serial Number may be
different from actual, but the quality of item is almost equal.

 

Compatible Table

Other makers products that are compatible with this product
for MAIN DIMENSION – (LRX25)

Dimensional interchangeability to the ball type

 

Type

Maker

LM Type

Country Of Origin

LRX25

IKO

Roller Type

Japan

SRG25C

THK

Roller Type

Japan

R1651-2XX

Rexroth
Bosch(STAR)

Ball

Germany

HSR25A

THK

Ball

Japan,
Korea

LWHT25

IKO

Ball

Japan

SHS25C

THK

Ball

Japan

LH25EL

NSK

Ball

Japan

MSA25A

PMI

Ball

Taiwan

BRH25A

ABBA

Ball

Taiwan

SBG25FL

SBC

Ball

Korea

HGW25CA

Hiwin

Ball

Taiwan

But, Other maker of rail and
other maker’s block is not compatible. (Mutually
exclusive)

 

If You Want

  • If you want review actual item
    then request actual image before buying, send message. 🙂

  • You can purchase more quantity of goods. Please
    message to us. Actual item quantity is more exist.

  • If you have any questions
    about product or shipping method, send message us and we will help your
    business with pleasure.

 

Shipping Notice:

We Use shipping address by PAYPAL
Information.

Also let us
know your contact number (phone or mobile number) for
accurate delivery.

Or you
check your shipping address and information before you buy. (delivery address
and PAYPAL address should same)

 

This item will be shipped via
FEDEX service or equivalent shipping service (EMS), it usually takes 5 to 10 days to deliver. Sometimes it takes more
than usual. Please understand it depends on the customs and carrier of your country. But please don’t worry. Most of the time it is
delivered on time.

we serve to you free shipping service, but
you should consider duty, tax, or brokerage charge.

If you
don’t want FEDEX,UPS,DHL shipping, please let us know.

  • FedEx : North America, Europe.
  • EMS : Commonwealth of
    Independent States (CIS-Russia, Ukraine…. And so on)

           France, South
America and some county 

  • UPS, DHL : consider extra
    charge – should calculate exact shipping fee.

 

If
you want to know exact carrier and delivery time please send message before
purchase.

It can be shipped more faster ship method  that add ship payment. (Priority FEDEX,UPS,DHL)

 

EMS Shipped parcel : You can find trace result at ” http://www.track-trace.com/post” without “-” Track Number.

  • Depending on
    the country, the track information of the Post office can’t display.

 

Tax Policy : Buyer’s duty

International Buyers (include US customers) – Please Note:

Import
duties, taxes, and charges are not included in the item price or shipping cost.
These charges are the buyer’s responsibility.

Please check with your
country’s customs office to determine what these additional costs will be prior
to bidding or buying.

If you have
any request for customs clearance, please leave a note when you order.

 

Business  and Shipping Hours:

9am to 6pm
(UCT/GMT+9hour) Monday to Friday

We are
closed on Weekends and all major Korea holidays.

Compare the
time of Korea and your Country. : http://www.timeanddate.com/worldclock/

Current
Korea Time : http://www.timeanddate.com/worldclock/city.html?n=235

Available Shipping Hours:

9am to 2pm (Working Day – Monday ~ Friday )


Feedback:

Your satisfaction is
our goal. Please give us a feedback regarding our product and service.

Your feedback is
valuable to us. Please help us to serve you better.

Please contact us
first before you give us a low rating in feedback. We will do our best to
resolve any issue for your complete satisfaction.

 

Payment:

Paypal Only

 

Tax Policy:

International buyers are responsible for tariffs,
taxs, duties, and all costs for import goods.

 

Return Policy

Please
contact us first before returning.

Return can be accepted within 14 days after item’s arrival, and it has to be in the original
condition as it was sent out.

Buyer
is responsible for the postage of the returned item, and the original postage
cost is not refundable.

If
you would like to exchange an item, additional postage charge also will incur
for dispatching the item back to you.

 

 

Thank
you for your coming

We
are very glad to help your business or hobby.

 

 

VISIT Industrial Parts STORE

Please Contact Us !

Click